Оборудование для алмазного покрытия DA600PRO от китайских поставщиков и фабрики для высококачественного нанесения
High deposition rate
The current density of the arc spot is as high as 1012A/m2, and the energy density is as high as 1013W/m2. The high energy density directly leads to the transformation of the target material at the arc spot from solid phase to metal vapor plasma.
High ionization rate
Arc discharge is generated between the cathode evaporation source and the shell, and glow discharge is generated between the workpiece base and the shell, causing the cathode target to evaporate and ionize, generally up to 60-80%.
efficient and convenient
Fully automatic coating system, efficient and reliable, capable of batch production 4-5 times a day, equipped with historical records, storable process recipes, offline editing, abnormal alarm, and touch screen operation.
High impact resistance
The film has moderate hardness, film adhesion, high rigidity, and good impact resistance, suitable for rough machining.
-
Capability for fast delivery (Get the shortes production process) -
Customized individually -
High stability (More than 10 years ofproduction experience)

Workpiece:
42CrMo (38-42HRC)
GB:42CrMo
ASME:4140
JIS:SCM440
Cutting data:Blind Hole Drilling
Cutting speed Vc = 70m/min
Feeding Fn = 0.15mm/r
Cooling:External cooling, Emulsion

Result:
Huasheng's HPD130 coated tool can achieve a cutting life of 63 meters
The coated tool from competitor BHE offers a cuttinglife of 49 meters。
The cutting life has been improved by 28.6%


| Модель | DA600PRO |
| Технология покрытия | CVD с горячей нитью |
| Размер оборудования (мм) | length2600*width2100*height2700 |
| Объём (м³) | 0.16 |
| Область покрытия (мм) | 300*300 |
| Максимальный размер обрабатываемых концевых фрез (мм) | D16*150 |
| Вместимость (D3) | 500 шт. |
| Время процесса (ч) | 16~33 |
В оборудовании DA600PRO применяется передовая технология CVD с горячей нитью (Hot Filament CVD), которая обеспечивает высокую адгезию и равномерность наносимого слоя.
Установка DA600PRO способна одновременно обрабатывать до 500 единиц концевых фрез размера D3 за один рабочий цикл.
Максимальный размер обрабатываемых концевых фрез составляет D16*150 мм, при этом эффективная область покрытия равна 300*300 мм.
Продолжительность технологического процесса составляет от 16 до 33 часов в зависимости от спецификации и толщины требуемого слоя покрытия.
Физические размеры оборудования составляют 2600 мм в длину, 2100 мм в ширину и 2700 мм в высоту. Общий рабочий объем составляет 0.16 м³.

